Sales & Rentals 24 x 7
    Pickford - Top Distributor in Western Canada - Plant Maintenance Equipment & Flow Control
    • Rentals
      • Bolting Equipment Rentals >
        • Torquing Rentals
        • Tensioning Rentals
        • Nutsplitter Rentals
      • Hydrostatic Pipe Testing & Isolation Plug Rentals >
        • Pipe Test Plug Rentals
        • Flange Test Plug Rentals
        • Isolation Test Plug Rentals
      • Pipe & Flange Product Rentals >
        • Flange Alignment Tool Rentals
        • Flange Spreading Tool Rentals
        • Other Pipe & Flange Tool Rentals
      • Portable Machining Rentals >
        • Pipe Cutting Rentals
        • Pipe End Prepping Rentals
        • Flange Facing Rentals
        • Boring Drilling & Milling
      • Heat Exchanger Product Rentals >
        • Tube Cleaning Rentals
        • Tube Testing Rentals
        • Tube Plugging Rentals
        • Tube Removal Rentals
        • Tube Installation Rentals
    • Plant Maintenance
      • Bolting Equipment >
        • Torquing
        • Tensioning
        • Nutsplitter
      • Hydrostatic Pipe Testing & Isolation Plugs >
        • Pipe Test Plugs
        • Flange Test Plugs
        • Isolation Test Plugs
        • Hydrostatic Test Pumps
      • Pipe & Flange Products >
        • Flange Alignment Tools
        • Flange Spreading Tools
        • Other Pipe & Flange Tools
      • Portable Machining >
        • Pipe Cutting
        • Pipe End Prepping
        • Flange Facing
      • Heat Exchanger Products >
        • Tube Cleaning
        • Tube Testing
        • Tube Plugging
        • Tube Removal
        • Tube Installation
        • Heat Exchanger Accessories
      • Heavy Lift >
        • Hydraulic Cylinders
        • Hydraulic Jacks
        • Hydraulic Pumps
        • Custom Lifts
      • Industrial Hand Tools
      • Ergonomic Tool Holding
    • Service
      • iCertify
      • Authorized Enerpac Service Center
    • Flow Control
      • Valves >
        • Ball Valves
        • Gate Valves
        • Globe Valves
        • Check Valves
        • Double Block & Bleed Valves
        • Butterfly Valves
        • Tailor-made Valves
      • Actuation & Accessories >
        • Actuators
        • Positioners
        • Accessories
      • Welding Pre / Post Heater System
      • Motionless Mixers
      • Oilwell Pumping Equipment
    • About
      • Catalog >
        • Plant Maintenance Equipment Catalog
        • Flow Control Catalog
      • Management Team
      • Indigenous Relations
      • History
      • Terms and Conditions
      • Credit Application
    • Contact Us

    Plant Maintenance Equipment

    Enerpac

    Pickford offers a large selection of Enerpac products for sale and rent. This includes hydraulic torque tools, tensioners, nutsplitters, cutters, and heavy lift products. Contact Us today!

    Authorized Service Center

    We have factory trained technicians with OEM parts, equipment, and fast repair turnaround. Pickford is the largest authorized Enerpac service center location in Alberta.
    Picture

    Torquing

    RSL Hydraulic Torque Wrench

    Hydratight Lightweight Hydraulic Tourqe Wrenches RSL Series
    Enerpac RSL Series Hydraulic Torque Wrenches are light weight, simple to maintain, and durable. Torque ranges up to 28,002 ft.lbs are available in either Hex Wrench Head design or a Square Drive Wrench.
    Contact Us
    Picture
    Specifications

    S & W Hydraulic Torque Wrench

    Hydratight Lightweight Hydraulic Tourqe Wrenches RSL Series
    Enerpac S & W Hydraulic Torque Wrenches have a compact, high-strength uni-body construction, which provides a small operating radius without sacrificing endurance.
    Contact Us
    Picture
    Specifications

    Torque Power Consoles

    Hydratight Hydraulic Power Consoles
    Enerpac Hydraulic Torque consoles are specifically designed for use with hydraulic torque wrenches.  They are available in electric, pneumatic, or battery powered.
    Contact Us
    Picture
    Specifications

    Torque Multipliers

    Hydratight Sweeney Torque Multiplier
    Enerpac "Sweeney" Torque Multipliers are available in either a reaction bar or reaction plate design with up to 8000 ft.lbs maximum torque output with +/- 5% accuracy.
    Contact Us
    Picture
    Specifications

    Torquing Software

    Informate

    Hydratight Informate Bolt Load Calculation Software
    Enerpac's Informate software is the next generation of software that provides bolting loads and tool pressures for flanged joints and clamped connections.
    Contact Us
    Picture
    Specifications

    iDMS (Integrity Data Management System)

    Hydratight iDMS (Integrity Data Management System) Software
    Enerpac's iDMS (Integrity Data Management System) software is designed to store the entire lifecycle data relating to every critical bolted joint on an installation. iDMS can be customized to meet customer needs.
    Contact Us
    Picture
    Specifications

    Hydraulic Pumps

    Enerpac hydraulic pumps are available in over 1,000 different configurations. Whatever your high pressure pump needs are, speed, control, intermittent or heavy-duty performance, you can be sure that Enerpac has a hydraulic power unit to suit the application. Featuring Hand, Battery, Electric, Air and Gasoline powered models, with multiple reservoir and valve configurations, Enerpac offers the most comprehensive high pressure pump line available. Contact Pickford today for assistance with your project.

    XC1401MB Series Battery Operated Pump

    ESCO Tool Heat Exchanger Tube Removal MILLHOG Mongoose
    The Enerpac XC1401MB Cordless Hydraulic Pump is compatible with all Enerpac hydraulic tools and small to medium sized cylinders. Ideal for jobs that require a combination of portability, speed, and safety. Perfect for remote locations without access to power.
    Contact Us
    Picture
    Specifications

    ZC Series Battery Operated Pump

    ESCO Tool Heat Exchanger Tube Removal MILLHOG Ground
    The Enerpac ZC-Series cordless hydraulic pumps combine the performance of an electric pump with the convenience and portability of a battery pump. They are ideal for jobs that require a combination of portability, speed and safety.
    Contact Us
    Picture
    Specifications

    Manual Hydraulic Pumps

    Elliott Tool Tube Tugger Heat Exchanger Tube Removal Tool
    Enerpac's manual pump line features high pressure hydraulic hand and foot pumps designed for portability, durability and ease-of-use. A large selection, makes it easy to find the most effective compact high pressure pump. Available in single acting, double acting, single or dual speed, up to 40,000 psi.

    Contact Us
    Picture
    Specifications

    Pneumatic Pumps

    ESCO Tool Heat Exchanger Tube Removal Air Powered Saw
    The Enerpac Air Driven Hydraulic Pumps are for use with a single-acting cylinder or tool. Variable oil flow and fine metering for precise control. ATEX Certified - Includes ground screw for explosion protection.


    Contact Us
    Picture
    Specifications
    Pickford supplies Enerpac pumps to all of Western Canada including Manitoba, Saskatchewan, Alberta, and British Columbia from our 40,000 sq.ft. Edmonton warehouse.

    Hydraulic Tensioning

    Enerpac Hydramax® Topside Tensioners

    Hydratight HydraMax Tensioner
    Enerpac HydraMax® Tensioner is a compact yet high load generating tensioner designed to fit all standard flanges including ANSI, API, and Compact flanges. Maximum working pressure 21,750 psi.
    Contact Us
    Picture
    Specifications

    Enerpac Base Bolt Tensioners

    Hydratight Base Bolt Tensioner
    Enerpac Base Bolt Tensioner is designed for the wind energy market with a 20% reduction in width to allow fitting on all applications including the inner bolts. Fits #10 or #11 Williams or Dyson base bolt.
    Contact Us
    Picture
    Specifications

    Hydraulic Cylinders

    Enerpac hydraulic cylinders are available in hundreds of different configurations. Whatever the industrial application; lifting, pushing, pulling, bending, holding, whatever the force capacity, stroke length, or size restrictions, single- or double-acting, solid or hollow plunger, you can be sure that Enerpac has the cylinder to suit your high force application. Enerpac jacking cylinders fully comply to ASME B30.1 (except RD-Series). Contact Pickford today for assistance with your project.

    RSM100 Cylinder

    Elliott Tool Tube Tugger Heat Exchanger Tube Removal Tool
    Enerpac RSM100, 11.2 ton capacity, .44 in stroke, low height hydraulic cylinder. CR-400 coupler and dust cap included. Collapsed height of 1.69 inches.
    Contact Us
    Picture
    Specifications

    RCS201 Cylinder

    ESCO Tool Heat Exchanger Tube Removal MILLHOG Ground
    Enerpac RCS201, 22.1 ton capacity, 1.75 in stroke, low height hydraulic cylinder, CR-400 coupler and dust cap included. Collapsed height of 3.88 inches.

    Contact Us
    Picture
    Specifications

    RCH202 Cylinder

    ESCO Tool Heat Exchanger Tube Removal MILLHOG Mongoose
    Enerpac RCH202, 23.6 ton capacity, 2.00 in stroke, single-acting, hollow plunger hydraulic cylinder. Hollow plunger design allows for both pull and push forces. Includes AR-630 coupler and has 1/4 NPTF port, features CR-400 Coupler, Collapsed height of 6.38 inches.

    Contact Us
    Picture
    Specifications

    RC308 Cylinder

    ESCO Tool Heat Exchanger Tube Removal Air Powered Saw
    Enerpac RC308, 32.4 ton capacity, 8.25 in stroke, general purpose hydraulic cylinder. CR-400 coupler and dust cap included. Collapsed height of 15.25 inches.

    Contact Us
    Picture
    Specifications
    Pickford supplies Enerpac hydraulic cylinders to all of Western Canada including Manitoba, Saskatchewan, Alberta, and British Columbia from our 40,000 sq.ft. Edmonton warehouse.

    Industrial Cutters

    Enerpac's line of industrial cutters includes five families of tools designed to cut metal bar, industrial chain, wire rope and cables, metal tubes, profiles and similar materials. Enerpac cutters are built to handle industrial-grade materials on a daily basis. Each cutter is designed and built to last in tough working conditions for a simpler and more productive workflow.

    Bar Cutters

    Elliott Tool Tube Tugger Heat Exchanger Tube Removal Tool
    Enerpac EB-Series Bar Cutters consist of hydraulic and electric tools that quickly and easily cut through heavy-duty metal bars. The highly durable, long-lasting blades outlast angle grinders or saw blades. Produces minimal spark and vibration risk. For cutting round metal bar including up to number 14 rebar. 

    Contact Us
    Picture
    Specifications

    Chain Cutters

    Elliott Tool Tube Tugger Heat Exchanger Tube Removal Tool
    Enerpac ECC-Series Chain Cutters are a safe and simple solution for cutting industrial chains. The ECC is ideal for use in chain cutting applications found in rigging, mining, oil and gas and marine environments.
    Contact Us
    Picture
    Specifications

    Wire and Cable Cutters

    Elliott Tool Tube Tugger Heat Exchanger Tube Removal Tool
    Enerpac EWC-Series Wire and Cable Cutters offer a quick and clean way to cut cable and wire rope. EWC-Series tools are recommended for applications in telecommunications, power generation, and ship building.
    Contact Us
    Picture
    Specifications

    Flat Bar Cutters

    Elliott Tool Tube Tugger Heat Exchanger Tube Removal Tool
    Enerpac EFB-Series Flat Bar Cutters are able to easily cut flat or rectangular metal bar within seconds. Unlike standard bar cutters, the deep cutting head design accommodates metal bar up to 2 ¾” (70 mm) high and over ½” (15 mm) thick.
    Contact Us
    Picture
    Specifications

    Decommissioning Cutters

    Elliott Tool Tube Tugger Heat Exchanger Tube Removal Tool
    Enerpac EDC-Series Decommissioning cutters feature a set of large and powerful shear-style blades. These versatile tools are able to quickly cut through a large variety of materials including metal tubes, cables, profiles and similar materials.
    Contact Us
    Picture
    Specifications

    Cutter Pumps

    Elliott Tool Tube Tugger Heat Exchanger Tube Removal Tool
    Complementing the new Enerpac Cutters is a specially adapted ZE6-Series pump, which generates the precise flow needed to provide the ideal combination of speed and power to those cutter models that require an external hydraulic pump. Cutter operations are controlled directly from the tools.
    Contact Us
    Picture
    Specifications

    Hydraulic Jacks

    Enerpac hydraulic jacks are portable lifting systems for lifting heavy loads. The Pow’R-LOCK is a self-locking jack that performs automatic mechanical locking during lifting, lowering and holding. The Pow’R-RISER is capable of lifting and lowering heavy loads. For safe mechanical cribbing of a lifted load, accessory locking U-Rings can be placed around an extended piston. Contact Pickford today for assistance with your project.

    PL20014ASA Hydraulic Jack

    Elliott Tool Tube Tugger Heat Exchanger Tube Removal Tool
    Enerpac PL20014ASA, 200 Ton, 14.0 in stroke, Pow'R-LOCK self-locking portable lifting jack. Simple 2-button pendant allows operation of raise and lower functions from up to 20 feet away.
    Contact Us
    Picture
    Specifications

    PRAMA06014L Hydraulic Jack

    ESCO Tool Heat Exchanger Tube Removal MILLHOG Ground
    Enerpac PRAMA06014L, 60 Ton, 14 in stroke, pneumatic POW'R-RISER lifting jack. 4-inch ground clearance for transport over rail and rough terrain. Allows lifting at all heights without blocking.
    Contact Us
    Picture
    Specifications
    Pickford supplies Enerpac hydraulic jacks to all of Western Canada including Manitoba, Saskatchewan, Alberta, and British Columbia from our 40,000 sq.ft. Edmonton warehouse.

    Custom Lifts

    Enerpac designs and manufactures heavy lifting equipment. For more than 60 years, they have combined high pressure hydraulics and controls to deliver intelligent and innovative solutions that maintain the highest level of quality, reliability and safety. As an industry leader, Enerpac can custom engineer a solution Contact Us today regarding your custom heavy lift requirement.

    SBL1100 Hydraulic Gantry

    Elliott Tool Tube Tugger Heat Exchanger Tube Removal Tool
    Enerpac Hydraulic Gantries are a safe, efficient way to lift and position heavy loads, where traditional cranes will not fit. Super Lift (SL) series: cost effective models that offers control and stability. Super Boom Lift (SBL) series: heavy duty - up to 1200 ton capacity. Mega Boom Lift (MBL) series: hydraulic boom, two leg configuration can achieve lifting heights over 40 feet.


    Contact Us
    Picture
    Specifications

    HSL Series Strand Jack

    Elliott Tool Tube Tugger Heat Exchanger Tube Removal Tool
    The Enerpac HSL Series Strand Jacks have a capacity of up to 562 Ton. Provides precise synchronous control with heavy lifting capacity in an economical, compact, and reliable foot print.
    Contact Us
    Picture
    Specifications
    Pickford can provide custom lifts - engineered to fit your unique requirement. Contact us today. Serving Saskatchewan, Alberta, and British Columbia from our 40,000 sq.ft. Edmonton warehouse.

    Company

    • About
    • Management Team
    • History
    • Contact Us

    Product

    • Rental Equipment
    • Plant Maintenance Equipment
    • Service Facility
    • Flow Control & Actuation
    Providing Sales, Rentals and Service Solutions in Canada including Alberta, BC, Saskatchewan, Manitoba, and Northwest Territories. We have your largest warehouse inventory 24 / 7.
    © COPYRIGHT 2022.  The Pickford Group Ltd.
    ALL RIGHTS RESERVED
    .
    Back to top