Sales & Rentals 24 x 7
    Pickford - Top Distributor in Western Canada - Plant Maintenance Equipment & Flow Control
    • Rentals
      • Bolting Equipment Rentals >
        • Torquing Rentals
        • Tensioning Rentals
        • Nutsplitter Rentals
      • Hydrostatic Pipe Testing & Isolation Plug Rentals >
        • Pipe Test Plug Rentals
        • Flange Test Plug Rentals
        • Isolation Test Plug Rentals
      • Pipe & Flange Product Rentals >
        • Flange Alignment Tool Rentals
        • Flange Spreading Tool Rentals
        • Other Pipe & Flange Tool Rentals
      • Portable Machining Rentals >
        • Pipe Cutting Rentals
        • Pipe End Prepping Rentals
        • Flange Facing Rentals
        • Boring Drilling & Milling
      • Heat Exchanger Product Rentals >
        • Tube Cleaning Rentals
        • Tube Testing Rentals
        • Tube Plugging Rentals
        • Tube Removal Rentals
        • Tube Installation Rentals
    • Plant Maintenance
      • Bolting Equipment >
        • Torquing
        • Tensioning
        • Nutsplitter
      • Hydrostatic Pipe Testing & Isolation Plugs >
        • Pipe Test Plugs
        • Flange Test Plugs
        • Isolation Test Plugs
        • Hydrostatic Test Pumps
      • Pipe & Flange Products >
        • Flange Alignment Tools
        • Flange Spreading Tools
        • Other Pipe & Flange Tools
      • Portable Machining >
        • Pipe Cutting
        • Pipe End Prepping
        • Flange Facing
      • Heat Exchanger Products >
        • Tube Cleaning
        • Tube Testing
        • Tube Plugging
        • Tube Removal
        • Tube Installation
        • Heat Exchanger Accessories
      • Heavy Lift >
        • Hydraulic Cylinders
        • Hydraulic Jacks
        • Hydraulic Pumps
        • Custom Lifts
      • Industrial Hand Tools
      • Ergonomic Tool Holding
    • Service
      • iCertify
      • Authorized Enerpac Service Center
    • Flow Control
      • Valves >
        • Ball Valves
        • Gate Valves
        • Globe Valves
        • Check Valves
        • Double Block & Bleed Valves
        • Butterfly Valves
        • Tailor-made Valves
      • Actuation & Accessories >
        • Actuators
        • Positioners
        • Accessories
      • Welding Pre / Post Heater System
      • Motionless Mixers
      • Oilwell Pumping Equipment
    • About
      • Catalog >
        • Plant Maintenance Equipment Catalog
        • Flow Control Catalog
      • Management Team
      • Indigenous Relations
      • History
      • Terms and Conditions
      • Credit Application
    • Contact Us

    Equipment Service

    Pickford Equipment Service

    Equipment Certifications

    Hydraulic Torque Tool Certification 2017

    At Pickford, we are continuously improving our services to meet our customers needs. We certify your tools with the AKO - TSD6500 Advanced digital torque indicator for torque tool certifications. The TSD6500 is the most advanced digital torque indicator serving the torque measurement industry and is “The standard by which torque Is calibrated”. Our technicians have been manufacturer trained to use the TSD6500 in order to supply you with the most accurate test results. The TSD6500 is capable of up to 20.000 updates per second (no averaging), as well as the capability to test up to 40,000 ft-lbs! The TSD6500 will supply the certification needed for your insurance & industry requirements.
     
    This is an invaluable certification tool. You can use the TSD6500 to properly upkeep your assets, as it helps notify areas of concern within your equipment. The TSD6500 provides you with the torque tool certification data to accurately achieve the specific value(s) needed to complete your job accurately and correctly every time.

    AKO, TSD6500 Calibration/Certification:
     
    4K Transducer: Certifies All Combinations under 3,080 ft-lbs.   $200.00ea
    • RSL2   Powerhead w/ 1-1/4” ~ 2-3/8” Hex or ¾” Square Drive.
    • RSL4   Powerhead w/ 1-1/4”~ 2-15/16” Hex or 1” Square Drive.
    • RSL6   Powerhead w/ 2” ~ 2-3/16” Hex.

    40K Transducer:
    Certifies All Combinations over 3,080 ft-lbs.          $200.00ea
    • RSL6   Powerhead w/ 2-3/8”  ~ 3-1/8” Hex or 1-1/2” Square Drive.
    • RSL8   Powerhead w/ 2-3/16”~ 3-1/2” Hex or 1-1/2” Square Drive.
    • RSL14 Powerhead w/ 2-9/16”~ 4-5/8” Hex or 1-1/2” Square Drive.
    • RSL20 Powerhead w/ 3-1/8”  ~ 4-5/8” Hex or 2-1/2” Square Drive.
    • RSL30 Powerhead w/ 3-7/8”  ~ 6-1/8” Hex or 2-1/2” Square Drive.
     
     
    NOTE: Package Rates available upon request.
    All Certification Requests can be forwarded to Jeff Plamondon.
    Picture

    Rad Torque Systems Tool Certification 2017

    For years Pickford has been servicing and calibrating RAD tools in house. Pickford has grown to be an industry leader complimented with a fully stocked parts inventory, measurement capability up to 40000 ft./lbs and factory trained technicians that help ensure your tool is running at its peak performance every use. Pickford’s factory trained technicians can diagnose, repair and calibrate your tool in a timely fashion with accurate results that meet industry standards!

    Pickford provides calibrations which include all documentation and certificates for each Rad Tool. Each calibration station is certified to The National Institute of Standards and Technology (NIST) standard ensuring high accuracy. This also provides trace-ability throughout the industry.

    Four Calibration Stations are currently in operation at our Edmonton, AB 40,000 sq/ft facility. Combined they cover the entire range of torque that the Rad line offers, meaning that we can diagnose, repair, and calibrate every Rad Tool at the Edmonton facility.
    Picture


    Rad Torque Systems Tool Certification
    $100.00 for Calibration
    • RCA-1000      Capable of Calibrating between         100-1000         ft.lbs
    • RCA-5000      Capable of Calibrating between         500-5000         ft.lbs
    • RCA-6000      Capable of Calibrating between         250-6000         ft.lbs
    • AKO-40000    Capable of Calibrating between         0-40000           ft.lbs

    Please send your tools to:
    Pickford
    #30-3250-51 Ave NW
    Edmonton, AB
    T6P 0E1



    Our warehouse is based in Edmonton, Alberta, and we are available to assist you 24 hours a day, 365 days a year. Contact Us today to experience the Pickford difference!


    Company

    • About
    • Management Team
    • History
    • Contact Us

    Product

    • Rental Equipment
    • Plant Maintenance Equipment
    • Service Facility
    • Flow Control & Actuation
    Providing Sales, Rentals and Service Solutions in Canada including Alberta, BC, Saskatchewan, Manitoba, and Northwest Territories. We have your largest warehouse inventory 24 / 7.
    © COPYRIGHT 2022.  The Pickford Group Ltd.
    ALL RIGHTS RESERVED
    .
    Back to top