Sales & Rentals 24 x 7
    Pickford - Top Distributor in Western Canada - Plant Maintenance Equipment & Flow Control
    • Rentals
      • Bolting Equipment Rentals >
        • Torquing Rentals
        • Tensioning Rentals
        • Nutsplitter Rentals
      • Hydrostatic Pipe Testing & Isolation Plug Rentals >
        • Pipe Test Plug Rentals
        • Flange Test Plug Rentals
        • Isolation Test Plug Rentals
      • Pipe & Flange Product Rentals >
        • Flange Alignment Tool Rentals
        • Flange Spreading Tool Rentals
        • Other Pipe & Flange Tool Rentals
      • Portable Machining Rentals >
        • Pipe Cutting Rentals
        • Pipe End Prepping Rentals
        • Flange Facing Rentals
        • Boring Drilling & Milling
      • Heat Exchanger Product Rentals >
        • Tube Cleaning Rentals
        • Tube Testing Rentals
        • Tube Plugging Rentals
        • Tube Removal Rentals
        • Tube Installation Rentals
    • Plant Maintenance
      • Bolting Equipment >
        • Torquing
        • Tensioning
        • Nutsplitter
      • Hydrostatic Pipe Testing & Isolation Plugs >
        • Pipe Test Plugs
        • Flange Test Plugs
        • Isolation Test Plugs
        • Hydrostatic Test Pumps
      • Pipe & Flange Products >
        • Flange Alignment Tools
        • Flange Spreading Tools
        • Other Pipe & Flange Tools
      • Portable Machining >
        • Pipe Cutting
        • Pipe End Prepping
        • Flange Facing
      • Heat Exchanger Products >
        • Tube Cleaning
        • Tube Testing
        • Tube Plugging
        • Tube Removal
        • Tube Installation
        • Heat Exchanger Accessories
      • Heavy Lift >
        • Hydraulic Cylinders
        • Hydraulic Jacks
        • Hydraulic Pumps
        • Custom Lifts
      • Industrial Hand Tools
      • Ergonomic Tool Holding
    • Service
      • iCertify
      • Authorized Enerpac Service Center
    • Flow Control
      • Valves >
        • Ball Valves
        • Gate Valves
        • Globe Valves
        • Check Valves
        • Double Block & Bleed Valves
        • Butterfly Valves
        • Tailor-made Valves
      • Actuation & Accessories >
        • Actuators
        • Positioners
        • Accessories
      • Welding Pre / Post Heater System
      • Motionless Mixers
      • Oilwell Pumping Equipment
    • About
      • Catalog >
        • Plant Maintenance Equipment Catalog
        • Flow Control Catalog
      • Management Team
      • Indigenous Relations
      • History
      • Terms and Conditions
      • Credit Application
    • Contact Us

    Equipment Service

    Maintenance Schedules

    Extend The Life of Your Tool With Scheduled Maintenance

    Picture
    Did you know?
     
    Pneumatic/Electric Hydraulic Pump – Recommended Service Schedule: Bi-Annually
    • Gauges are required to be certified annually.
    • Oil changes & Hose flushes should be accomplished bi-annually.
    • The Regulator & Lubricator should be reviewed/serviced daily.
    • Amperage levels should be reviewed frequently.
    • Brushes should be changed bi-annually.
    • Dripper should be set and maintained to 1 drip every 30 seconds.
    • Hoses require review after each shift.
     
    RSL Powerheads – Recommended Service Schedule: Bi-Annually
    • Certificate of Calibration is required annually.
    • Seal kits should be changed out to improve torque values annually.
    • Retractors should have the pins examined after every use.
    • Coupler O-Rings should be changed bi-annually.
    • Hoses require review after each shift.
     
    RSL Hex Heads & Square Drives – Recommended Service Schedule: Bi-Annually
    • Entire cleaning and service should be accomplished quarterly or after a heavy use.
    • MPI Testing is available upon request and is recommended every two years.
     
    Tensioners, Hydraulic – Recommended Service Schedule: Annually
    • After every use, the piston should be collapsed, releasing all the hydraulic oil.
    • Seals should be changed every two years.
     
    Rad Guns & Air Caddy – Recommended Service Schedule: Annually
    • Rad Guns are required to be certified annually.
    • The Regulator & Lubricator should be reviewed/serviced daily.
    • Dripper should be set and maintained to 1 drip every 4 seconds.
    • The hose requires review after each shift.
     
    Clamshells – Recommended Service Schedule: Annually
    • Complete cleaning, bearing inspection, grease replacement, and overall service should be accomplished annually.
    • Tool Block Slides require service after each heavy use to clear metal debris and prevent Feed Screw damage.
    • Trip Assemblies require review before every use.
     
    Pneumatic Motor – Recommended Service Schedule: Annually
    • Each motor should be completely cleaned, greased, and serviced annually.
    • Vanes should be replaced annually.
    • The Motor should be subject to a torque test annually to ensure its proper operation.
     
    Pneumatic Air Caddy – Recommended Service Schedule: Annually
    • The Regulator & Lubricator should be reviewed/serviced daily.
    • The hose requires review after each shift.
    • Dripper should be set and maintained to 1 drip every 30 seconds.
     
    Griptight & Highlift Test Plugs – Recommended Service Schedule: Annually
    • The Highlift Plugs race face requires refacing if worn.
    • The seal requires replacement if damaged or mis-shaped.
    • The grippers need to be replaced if chipped or worn.
    • The top plate needs to be faced/replaced if gouged.
    • Safety information needs to be replaced as required.
    • Chain Gags need to be reviewed before each use for durability.
     
    G-150 Tube Tester – Recommended Service Schedule: Annually
    • Rod and Tube require replacement if damaged.
    • Internal service and grease replaced annually.
     
    Esco Tools – Recommended Service Schedule: Annually
    • Blade holders and cutter should be reviewed/serviced after each heavy use.
    • The hose requires review after each shift.
    • Oiler should be reviewed/refilled every week of use.
    • Complete tear down, inspection, and grease replacement should be achieved annually.
    • The motor should be examined, blades replaced, and tested annually.
     
    Pop-It Flange Spreader – Recommended Service Schedule: Annually
    • Complete tear down and examination should be achieved bi-annually to prolong life.
    • Toes should be changed when worn & bent.
    • Ratchets should be serviced annually.
    • Drive Screw and Riser require new lube bi-annually.
     
     
    Please send your tools to:
    Pickford
    #30-3250-51 Ave NW
    Edmonton, AB
    T6P 0E1
     
    NOTE: Package Rates available upon request.
    All Certification Requests can be forwarded to Jeff Plamondon.

    Service Rates

    At Pickford - our rates are highly competitive. Our service technicians operate at a rate of $120.00 an hour, and we have set service rates for all commonly serviced item. We will not quote more than three hours on these items, meaning there is a cap on the repair charge, even if the repair goes into a fourth or fifth hour. We want to be there for you as your dedicated service department - when you need us the most.

    Our warehouse is based in Edmonton, Alberta, and we are available to assist you 24 hours a day, 365 days a year.
    Contact Us today to experience the Pickford difference!

    Company

    • About
    • Management Team
    • History
    • Contact Us

    Product

    • Rental Equipment
    • Plant Maintenance Equipment
    • Service Facility
    • Flow Control & Actuation
    Providing Sales, Rentals and Service Solutions in Canada including Alberta, BC, Saskatchewan, Manitoba, and Northwest Territories. We have your largest warehouse inventory 24 / 7.
    © COPYRIGHT 2022.  The Pickford Group Ltd.
    ALL RIGHTS RESERVED
    .
    Back to top